Remove and Install the Power Bay Guard for Frames 8...15

To access components in a power bay, you must remove the upper guard. Follow these steps to remove and install the upper guard in a power bay.
  1. Review the product advisories in Before You Begin.
  2. Remove power from the system.
  3. Open the corresponding power bay door.
  4. Loosen the six M5.5 x 13 mm Torx screws that secure the guard from the enclosure.
    example of how to remove the upper guard from a 800 mm wide input bay
  5. Install the guard in the reverse order of removal.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal