This table lists the renewal kits available for power bays for frames 8…15. (XT) appears in the description column in the table to help identify a kit that contains protective covers and/or dielectric grease on connectors.
Power Bay Ventilation Renewal Kits
Cat. No.
Description
Item in Figure
SK-RM-PBFAN-54FLTR1
IP54 Roof Vent Filter
A
SK-RM-INVFAN1-FUSE
IP54 Roof Vent Fan Fuse
B
SK-RM-PBFAN1-F8
IP54 Roof Vent Fan
C
SK-RM-PB4DR-54FLTR1
IP54 400 mm Wide Door Filter
D
SK-RM-PB4DR-21FLTR1
400 mm Wide IP21 Door Filter
E
SK-RM-PB6DR-54FLTR1
600 mm Wide IP54 Door Filter
D
SK-RM-PB6DR-21FLTR1
600 mm Wide IP21 Door Filter
E
SK-RM-PB8DR-54FLTR1
800 mm Wide IP54 Door Filter
D
SK-RM-PB8DR-21FLTR1
800 mm Wide IP21 Door Filter
E
Power Bay Roof Ventilation Kits Identification
Power Bay Door Ventilation Kits Identification
DC Precharge Module and DC Link/Fuse Renewal Kits
Cat. No.
Description
Item in Figure
SK-RM-DCPC-HNDL
DC Precharge Module Disconnect Handle and Shaft
F
SK-RM-DCPC1-CD
400V/480V DC Precharge Circuit Board (XT)
G
SK-RM-DCPC1-EF
600V/690V DC Precharge Circuit Board (XT)
G
SK-RM-DCFUSE1-F8
400V/480V DC Precharge Fuses
H
SK-RM-DCFUSE2-F8
600V/690V DC Precharge Fuses
H
SK-RM-DCFUSE1-F8
400V/480V DC Link Fuses
I
SK-RM-DCFUSE2-F8
600V/690V DC Link Fuses
I
DC Precharge Module Kits Identification
DC Link Fuse Kits Identification
Power Module Renewal Kits
Cat. No.
Description
Notes
Item in Figure
20-750-MI1-CnnnDnnn
20-750-MI1-EnnnFnnn
20-750-MI2-CnnnDnnn
20-750-MI2-EnnnFnnn
20-750-MI3-CnnnDnnn
20-750-MI3-EnnnFnnn
Power Module (XT)
“MI1” identifies a power module with no paralleling inductor and no reflected wave filter. “MI2” identifies a power module with a paralleling inductor only. “MI3” identifies a power module with a reflected wave filter only. “C” and “D” in “CnnnDnnn” identifies a power module that is rated for 400/480V, respectively. “E” and “F” in “EnnnFnnn” identifies a power module that is rated for 600/ 690V, respectively. “nnn” in “CnnnDnnn” and “EnnnFnnn” identifies the power module amp rating.
To identify your power module catalog number, see the nameplate on the front of the module.
—
SK-RM-INV-JMPR-F8
Power Module Power Jumper (P5/P6)
—
J
SK-RM-PLI1-F8
Power Layer Interface Circuit Board (XT)
—
K
SK-RM-PIB1-CnnnDnnn
SK-RM-PIB1-EnnnFnnn
SK-RM-PIB2-CnnnDnnn
SK-RM-PIB2-EnnnFnnn
SK-RM-PIB3-CnnnDnnn
SK-RM-PIB3-EnnnFnnn
Power Interface Circuit Board (XT)
“PIB1” identifies a circuit board compatible with a power module with no paralleling inductor and no reflected wave filter. “PIB2” identifies a circuit board compatible with a power module with a paralleling inductor only. “PIB3” identifies a circuit board compatible with a power module with a reflected wave filter only. “C” and “D” in “CnnnDnnn” identifies a circuit board compatible with a power module that is rated for 400/480V, respectively. “E” and “F” in “EnnnFnnn” identifies a circuit board compatible with a power module that is rated for 600/690V, respectively. “nnn” in “CnnnDnnn” and “EnnnFnnn” identifies the amp rating the power module that the circuit board is compatible with. For kit to power module compatibility, see the power interface circuit board replacement procedure.
L
SK-RM-INVBR1-F8M
400/480V Balance Resistors
This kit contains two balance resistors.
M
SK-RM-INVBR2-F8M
600/690V Balance Resistors
This kit contains two balance resistors.
M
SK-RM-INVCS1-F8M
622 A Current Sensor
Compatible with power modules 20-750-MIn-C302D302, 20-750-MIn-C367D361, 20-750-MIn-C460D430, 20-750-MIn-C540D505, and all 20-750-MIn-EnnnFnnn.
N
SK-RM-INVCS2-F8
1000 A Current Sensor
Compatible with power modules 20-750-MIn-C585D545, 20-750-MIn-C650D617, 20-750-MIn-C750D710, and 20-750-MIn-C770D740.
N
SK-RM-GDB-C540D505
SK-RM-GDB-C770D740
SK-RM-GDB-E395F370
SK-RM-GDB-E545F505
Gate Driver Circuit Board
—
O
Power Module Circuit Boards and Jumper Identification
Power Module Power Kits Identification
LCL Filter Module Renewal Kits
Cat. No.
Description
Notes
Item in Figure
20-750-ML1-CnnnDnnn
20-750-ML1-EnnnFnnn
LCL Filter Module (XT)
“C” and “D” in “CnnnDnnn” identifies an LCL filter module that is rated for 400/480V, respectively. “E” and “F” in “EnnnFnnn” identifies an LCL filter module that is rated for 600/690V, respectively. “nnn” in “CnnnDnnn” and “EnnnFnnn” identifies the LCL filter module amp rating.
To identify your LCL filter module catalog number, see the nameplate on the front of the module.
—
SK-RM-ACFUSE1-F8
400/480V, 600V/690V AC Input Link Fuses
This kit contains three fuses. See the AC input link fuses replacement procedure for LCL filter module and AC input link fuse kit compatibility.
P
SK-RM-ACFUSE2-F8
400/480V, 600V/690V AC Input Link Fuses
This kit contains three fuses. See the AC input link fuses replacement procedure for LCL filter module and AC input link fuse kit compatibility.
P
SK-RM-ACFUSE3-F9
400/480V AC Input Link Fuses
This kit contains three fuses. See the AC input link fuses replacement procedure for LCL filter module and AC input link fuse kit compatibility.
P
SK-RM-ACFUSE4-F9
400/480V AC Input Link Fuses
This kit contains three fuses. See the AC input link fuses replacement procedure for LCL filter module and AC input link fuse kit compatibility.
P
SK-RM-ACFUSE5-F8
600V/690V AC Input Link Fuses
This kit contains three fuses. See the AC input link fuses replacement procedure for LCL filter module and AC input link fuse kit compatibility.
P
SK-RM-ACFUSE6-F9
600V/690V AC Input Link Fuses
This kit contains three fuses. See the AC input link fuses replacement procedure for LCL filter module and AC input link fuse kit compatibility.
P
SK-RM-LCLCP1-F8M
30 μF Capacitor Canister
This kit contains one capacitor. See the LCL filter capacitor assembly replacement procedure for LCL filter module and capacitor kit compatibility.
Q
SK-RM-LCLCP2-F8M
41 μF Capacitor Canister
This kit contains one capacitor. See the LCL filter capacitor assembly replacement procedure for LCL filter module and capacitor kit compatibility.
Q
SK-RM-LCLCP3-F8M
62 μF Capacitor Canister
This kit contains one capacitor. See the LCL filter capacitor assembly replacement procedure for LCL filter module and capacitor kit compatibility.
Q
SK-RM-LCLCP4-F8M
80 μF Capacitor Canister
This kit contains one capacitor. See the LCL filter capacitor assembly replacement procedure for LCL filter module and capacitor kit compatibility.
