Remove and Install the Frame 6 Cover

Remove the cover from the chassis to access components within the drive or bus supply. Follow these steps to remove and install the cover from the chassis.
  1. Review the product advisories in Before You Begin.
  2. Remove power from the system.
  3. Loosen the eight M4 x 8 mm captive screws that secure the cover to the assembly, and remove the cover.
    frame 6 cover removal example
  4. TIP: Shown with optional conduit box installed.
  5. Install the cover in the reverse order of removal.
Provide Feedback
Have questions or feedback about this documentation? Please submit your feedback here.
Normal