Loading

PowerFlex 750-Series Drives Configuration for an Integrated Control System

分享:

EmailEmail
PrintPrint
  • 課程編號: CCA184-EL
  • 類型: e-Learning
  • 技術: Power Control (Drives and MCC) Courses
  • 類別: Maintain Troubleshoot
  • 持續時間: 3小時
E-Learning Course Catalog

This course provides you guidance on how to integrate your PowerFlex 753 or 755 drive into a system that includes:

  • Logix5000™ controllers
  • PanelView™ Plus terminals running FactoryTalk® View ME software

Throughout the course, you will have the chance to use a variety of hardware and software tools, including:

  • The A6 LCD HIM
  • Studio 5000 Logix Designer® application (formerly RSLogix 5000® software)
  • FactoryTalk View ME software

Prerequisites

To successfully complete this course, the following prerequisites are required:

  • Working knowledge of electricity, and knowledge of electrical and industrial safety (including PPE requirements and safe practices)
  • Completion of the PowerFlex 750-Series Startup and Configuration course (CCA182 or CCA182-EL)
  • Knowledge of Logix5000 system fundamentals and basic programming skills:
    • Creating a new project
    • Adding I/O
    • Working with tags
    • Writing and testing ladder logic that includes bits, timers and other common instructions
    • Uploading, downloading, and going online, through one or more of the following methods:
      • Completion of the Studio 5000 Logix Designer Level 1: Logix 5000 System Fundamentals course (CCP146 or CCP146-EL)
      • Experience programming basic Logix5000 control systems or above
  • Previous experience with FactoryTalk View ME software is strongly suggested

Who Should Attend

This course is intended for individuals who need to add PowerFlex 750-Series drives to an Integrated Architecture system.

Objectives

  • Adding PowerFlex 750-Series Drive to a Studio 5000 Logix Designer Project
  • Locating and Modifying  PowerFlex 750-Series Data from a Studio 5000 Logix Designer Project
  • Integrating a PowerFlex 750-Series Drive with a Logix5000 Controller
  • Adding PowerFlex 750-Series Faceplates to a FactoryTalk View ME Application
  • Operating a PowerFlex 750-Series Drive in an Integrated Architecture System

Ready to talk to a Training Enrollment Specialist?

How to Buy

To purchase training products or to learn more about our training solutions, please contact your local sales office or distributor.

How to Get Support

Need help with course selection, workstation options or more?
Please contact training services.

background texture grey gradient
  1. Chevron LeftChevron Left Rockwell Automation 首頁 Chevron RightChevron Right
  2. Chevron LeftChevron Left 支援 Chevron RightChevron Right
  3. Chevron LeftChevron Left 員工發展訓練課程服務 Chevron RightChevron Right
  4. Chevron LeftChevron Left Learning+ 訓練課程訂閱 Chevron RightChevron Right
  5. Chevron LeftChevron Left PowerFlex 750-Series Drives Configuration for an Integrated Control System Chevron RightChevron Right
請更新您的 cookie 設定以繼續.
此功能需要 cookie 來改善您的體驗。請更新您的設定以允許這些 cookie:
  • 社群媒體Cookie
  • 功能Cookie
  • 性能Cookie
  • 行銷Cookie
  • 全部Cookie
您可以隨時更新您的設定。想了解更多訊息,請參閱我們的 {0} 隱私政策
CloseClose